Single row bearings inch
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many,Can operate with low noise,Require little maintenance.
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

- 36691/36620 Single row bearings inch
- 21.8
- 50mm

- HM926747/HM926719 Single row bearings inch
- Standard
- Steel

- 52393/52618 Single row bearings inch
- 8500
- ACBB_SR_MM_DT

- EE722115/722185 Single row bearings inch
- Standard
- In Stock

- LL648434/LL648415 Single row bearings inch
- Open Type
- 56mm

- HH224346/HH224310 Single row bearings inch
- 11.9
- 7.938

- EE170975/171400 Single row bearings inch
- 1.72
- 34000

- H936349/H936310 Single row bearings inch
- 43.00 mm
- 1.00 mm

- 52393/52618 Single row bearings inch
- 937
- Open Type

- 74551X/74846X Single row bearings inch
- 133000 N
- 2.00 mm